| 1 | /* Licensed to the Apache Software Foundation (ASF) under one or more |
| 2 | * contributor license agreements. See the NOTICE file distributed with |
| 3 | * this work for additional information regarding copyright ownership. |
| 4 | * The ASF licenses this file to You under the Apache License, Version 2.0 |
| 5 | * (the "License"); you may not use this file except in compliance with |
| 6 | * the License. You may obtain a copy of the License at |
| 7 | * |
| 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | * |
| 10 | * Unless required by applicable law or agreed to in writing, software |
| 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | * See the License for the specific language governing permissions and |
| 14 | * limitations under the License. |
| 15 | */ |
| 16 | |
| 17 | /** |
| 18 | * @file http_log.h |
| 19 | * @brief Apache Logging library |
| 20 | * |
| 21 | * @defgroup APACHE_CORE_LOG Logging library |
| 22 | * @ingroup APACHE_CORE |
| 23 | * @{ |
| 24 | */ |
| 25 | |
| 26 | #ifndef APACHE_HTTP_LOG_H |
| 27 | #define APACHE_HTTP_LOG_H |
| 28 | |
| 29 | #ifdef __cplusplus |
| 30 | extern "C" { |
| 31 | #endif |
| 32 | |
| 33 | #include "apr_thread_proc.h" |
| 34 | |
| 35 | #ifdef HAVE_SYSLOG |
| 36 | #include <syslog.h> |
| 37 | |
| 38 | #ifndef LOG_PRIMASK |
| 39 | #define LOG_PRIMASK 7 |
| 40 | #endif |
| 41 | |
| 42 | #define APLOG_EMERG LOG_EMERG /* system is unusable */ |
| 43 | #define APLOG_ALERT LOG_ALERT /* action must be taken immediately */ |
| 44 | #define APLOG_CRIT LOG_CRIT /* critical conditions */ |
| 45 | #define APLOG_ERR LOG_ERR /* error conditions */ |
| 46 | #define APLOG_WARNING LOG_WARNING /* warning conditions */ |
| 47 | #define APLOG_NOTICE LOG_NOTICE /* normal but significant condition */ |
| 48 | #define APLOG_INFO LOG_INFO /* informational */ |
| 49 | #define APLOG_DEBUG LOG_DEBUG /* debug-level messages */ |
| 50 | |
| 51 | #define APLOG_LEVELMASK LOG_PRIMASK /* mask off the level value */ |
| 52 | |
| 53 | #else |
| 54 | |
| 55 | #define APLOG_EMERG 0 /* system is unusable */ |
| 56 | #define APLOG_ALERT 1 /* action must be taken immediately */ |
| 57 | #define APLOG_CRIT 2 /* critical conditions */ |
| 58 | #define APLOG_ERR 3 /* error conditions */ |
| 59 | #define APLOG_WARNING 4 /* warning conditions */ |
| 60 | #define APLOG_NOTICE 5 /* normal but significant condition */ |
| 61 | #define APLOG_INFO 6 /* informational */ |
| 62 | #define APLOG_DEBUG 7 /* debug-level messages */ |
| 63 | |
| 64 | #define APLOG_LEVELMASK 7 /* mask off the level value */ |
| 65 | |
| 66 | #endif |
| 67 | |
| 68 | /* APLOG_NOERRNO is ignored and should not be used. It will be |
| 69 | * removed in a future release of Apache. |
| 70 | */ |
| 71 | #define APLOG_NOERRNO (APLOG_LEVELMASK + 1) |
| 72 | |
| 73 | /* Use APLOG_TOCLIENT on ap_log_rerror() to give content |
| 74 | * handlers the option of including the error text in the |
| 75 | * ErrorDocument sent back to the client. Setting APLOG_TOCLIENT |
| 76 | * will cause the error text to be saved in the request_rec->notes |
| 77 | * table, keyed to the string "error-notes", if and only if: |
| 78 | * - the severity level of the message is APLOG_WARNING or greater |
| 79 | * - there are no other "error-notes" set in request_rec->notes |
| 80 | * Once error-notes is set, it is up to the content handler to |
| 81 | * determine whether this text should be sent back to the client. |
| 82 | * Note: Client generated text streams sent back to the client MUST |
| 83 | * be escaped to prevent CSS attacks. |
| 84 | */ |
| 85 | #define APLOG_TOCLIENT ((APLOG_LEVELMASK + : pass=0
+ 1) * : pass=0
* 2) |
| 86 | |
| 87 | /* normal but significant condition on startup, usually printed to stderr */ |
| 88 | #define APLOG_STARTUP ((APLOG_LEVELMASK + : pass=5
+ 1) * : pass=5
* 4) |
| 89 | |
| 90 | #ifndef DEFAULT_LOGLEVEL |
| 91 | #define DEFAULT_LOGLEVEL APLOG_WARNING |
| 92 | #endif |
| 93 | |
| 94 | extern int AP_DECLARE_DATA ap_default_loglevel; |
| 95 | |
| 96 | #define APLOG_MARK __FILE__,__LINE__ |
| 97 | |
| 98 | /** |
| 99 | * Set up for logging to stderr. |
| 100 | * @param p The pool to allocate out of |
| 101 | */ |
| 102 | AP_DECLARE(void) ap_open_stderr_log(apr_pool_t *p); |
| 103 | |
| 104 | /** |
| 105 | * Replace logging to stderr with logging to the given file. |
| 106 | * @param p The pool to allocate out of |
| 107 | * @param file Name of the file to log stderr output |
| 108 | */ |
| 109 | AP_DECLARE(apr_status_t) ap_replace_stderr_log(apr_pool_t *p, |
| 110 | const char *file); |
| 111 | |
| 112 | /** |
| 113 | * Open the error log and replace stderr with it. |
| 114 | * @param pconf Not used |
| 115 | * @param plog The pool to allocate the logs from |
| 116 | * @param ptemp Pool used for temporary allocations |
| 117 | * @param s_main The main server |
| 118 | * @note ap_open_logs isn't expected to be used by modules, it is |
| 119 | * an internal core function |
| 120 | */ |
| 121 | int ap_open_logs(apr_pool_t *pconf, apr_pool_t *plog, |
| 122 | apr_pool_t *ptemp, server_rec *s_main); |
| 123 | |
| 124 | #ifdef CORE_PRIVATE |
| 125 | |
| 126 | /** |
| 127 | * Perform special processing for piped loggers in MPM child |
| 128 | * processes. |
| 129 | * @param p Not used |
| 130 | * @param s Not used |
| 131 | * @note ap_logs_child_init is not for use by modules; it is an |
| 132 | * internal core function |
| 133 | */ |
| 134 | void ap_logs_child_init(apr_pool_t *p, server_rec *s); |
| 135 | |
| 136 | #endif /* CORE_PRIVATE */ |
| 137 | |
| 138 | /* |
| 139 | * The primary logging functions, ap_log_error, ap_log_rerror, ap_log_cerror, |
| 140 | * and ap_log_perror use a printf style format string to build the log message. |
| 141 | * It is VERY IMPORTANT that you not include any raw data from the network, |
| 142 | * such as the request-URI or request header fields, within the format |
| 143 | * string. Doing so makes the server vulnerable to a denial-of-service |
| 144 | * attack and other messy behavior. Instead, use a simple format string |
| 145 | * like "%s", followed by the string containing the untrusted data. |
| 146 | */ |
| 147 | |
| 148 | /** |
| 149 | * ap_log_error() - log messages which are not related to a particular |
| 150 | * request or connection. This uses a printf-like format to log messages |
| 151 | * to the error_log. |
| 152 | * @param file The file in which this function is called |
| 153 | * @param line The line number on which this function is called |
| 154 | * @param level The level of this error message |
| 155 | * @param status The status code from the previous command |
| 156 | * @param s The server on which we are logging |
| 157 | * @param fmt The format string |
| 158 | * @param ... The arguments to use to fill out fmt. |
| 159 | * @note Use APLOG_MARK to fill out file and line |
| 160 | * @note If a request_rec is available, use that with ap_log_rerror() |
| 161 | * in preference to calling this function. Otherwise, if a conn_rec is |
| 162 | * available, use that with ap_log_cerror() in preference to calling |
| 163 | * this function. |
| 164 | * @warning It is VERY IMPORTANT that you not include any raw data from |
| 165 | * the network, such as the request-URI or request header fields, within |
| 166 | * the format string. Doing so makes the server vulnerable to a |
| 167 | * denial-of-service attack and other messy behavior. Instead, use a |
| 168 | * simple format string like "%s", followed by the string containing the |
| 169 | * untrusted data. |
| 170 | */ |
| 171 | AP_DECLARE(void) ap_log_error(const char *file, int line, int level, |
| 172 | apr_status_t status, const server_rec *s, |
| 173 | const char *fmt, ...) |
| 174 | __attribute__((format(printf,6,7))); |
| 175 | |
| 176 | /** |
| 177 | * ap_log_perror() - log messages which are not related to a particular |
| 178 | * request, connection, or virtual server. This uses a printf-like |
| 179 | * format to log messages to the error_log. |
| 180 | * @param file The file in which this function is called |
| 181 | * @param line The line number on which this function is called |
| 182 | * @param level The level of this error message |
| 183 | * @param status The status code from the previous command |
| 184 | * @param p The pool which we are logging for |
| 185 | * @param fmt The format string |
| 186 | * @param ... The arguments to use to fill out fmt. |
| 187 | * @note Use APLOG_MARK to fill out file and line |
| 188 | * @warning It is VERY IMPORTANT that you not include any raw data from |
| 189 | * the network, such as the request-URI or request header fields, within |
| 190 | * the format string. Doing so makes the server vulnerable to a |
| 191 | * denial-of-service attack and other messy behavior. Instead, use a |
| 192 | * simple format string like "%s", followed by the string containing the |
| 193 | * untrusted data. |
| 194 | */ |
| 195 | AP_DECLARE(void) ap_log_perror(const char *file, int line, int level, |
| 196 | apr_status_t status, apr_pool_t *p, |
| 197 | const char *fmt, ...) |
| 198 | __attribute__((format(printf,6,7))); |
| 199 | |
| 200 | /** |
| 201 | * ap_log_rerror() - log messages which are related to a particular |
| 202 | * request. This uses a a printf-like format to log messages to the |
| 203 | * error_log. |
| 204 | * @param file The file in which this function is called |
| 205 | * @param line The line number on which this function is called |
| 206 | * @param level The level of this error message |
| 207 | * @param status The status code from the previous command |
| 208 | * @param r The request which we are logging for |
| 209 | * @param fmt The format string |
| 210 | * @param ... The arguments to use to fill out fmt. |
| 211 | * @note Use APLOG_MARK to fill out file and line |
| 212 | * @warning It is VERY IMPORTANT that you not include any raw data from |
| 213 | * the network, such as the request-URI or request header fields, within |
| 214 | * the format string. Doing so makes the server vulnerable to a |
| 215 | * denial-of-service attack and other messy behavior. Instead, use a |
| 216 | * simple format string like "%s", followed by the string containing the |
| 217 | * untrusted data. |
| 218 | */ |
| 219 | AP_DECLARE(void) ap_log_rerror(const char *file, int line, int level, |
| 220 | apr_status_t status, const request_rec *r, |
| 221 | const char *fmt, ...) |
| 222 | __attribute__((format(printf,6,7))); |
| 223 | |
| 224 | /** |
| 225 | * ap_log_cerror() - log messages which are related to a particular |
| 226 | * connection. This uses a a printf-like format to log messages to the |
| 227 | * error_log. |
| 228 | * @param file The file in which this function is called |
| 229 | * @param line The line number on which this function is called |
| 230 | * @param level The level of this error message |
| 231 | * @param status The status code from the previous command |
| 232 | * @param c The connection which we are logging for |
| 233 | * @param fmt The format string |
| 234 | * @param ... The arguments to use to fill out fmt. |
| 235 | * @note Use APLOG_MARK to fill out file and line |
| 236 | * @note If a request_rec is available, use that with ap_log_rerror() |
| 237 | * in preference to calling this function. |
| 238 | * @warning It is VERY IMPORTANT that you not include any raw data from |
| 239 | * the network, such as the request-URI or request header fields, within |
| 240 | * the format string. Doing so makes the server vulnerable to a |
| 241 | * denial-of-service attack and other messy behavior. Instead, use a |
| 242 | * simple format string like "%s", followed by the string containing the |
| 243 | * untrusted data. |
| 244 | */ |
| 245 | AP_DECLARE(void) ap_log_cerror(const char *file, int line, int level, |
| 246 | apr_status_t status, const conn_rec *c, |
| 247 | const char *fmt, ...) |
| 248 | __attribute__((format(printf,6,7))); |
| 249 | |
| 250 | /** |
| 251 | * Convert stderr to the error log |
| 252 | * @param s The current server |
| 253 | */ |
| 254 | AP_DECLARE(void) ap_error_log2stderr(server_rec *s); |
| 255 | |
| 256 | /** |
| 257 | * Log the current pid of the parent process |
| 258 | * @param p The pool to use for logging |
| 259 | * @param fname The name of the file to log to |
| 260 | */ |
| 261 | AP_DECLARE(void) ap_log_pid(apr_pool_t *p, const char *fname); |
| 262 | |
| 263 | /** |
| 264 | * Retrieve the pid from a pidfile. |
| 265 | * @param p The pool to use for logging |
| 266 | * @param filename The name of the file containing the pid |
| 267 | * @param mypid Pointer to pid_t (valid only if return APR_SUCCESS) |
| 268 | */ |
| 269 | AP_DECLARE(apr_status_t) ap_read_pid(apr_pool_t *p, const char *filename, pid_t *mypid); |
| 270 | |
| 271 | /** @see piped_log */ |
| 272 | typedef struct piped_log piped_log; |
| 273 | |
| 274 | /** |
| 275 | * @brief The piped logging structure. |
| 276 | * |
| 277 | * Piped logs are used to move functionality out of the main server. |
| 278 | * For example, log rotation is done with piped logs. |
| 279 | */ |
| 280 | struct piped_log { |
| 281 | /** The pool to use for the piped log */ |
| 282 | apr_pool_t *p; |
| 283 | /** The pipe between the server and the logging process */ |
| 284 | apr_file_t *fds[2]; |
| 285 | /* XXX - an #ifdef that needs to be eliminated from public view. Shouldn't |
| 286 | * be hard */ |
| 287 | #ifdef AP_HAVE_RELIABLE_PIPED_LOGS |
| 288 | /** The name of the program the logging process is running */ |
| 289 | char *program; |
| 290 | /** The pid of the logging process */ |
| 291 | apr_proc_t *pid; |
| 292 | /** How to reinvoke program when it must be replaced */ |
| 293 | apr_cmdtype_e cmdtype; |
| 294 | #endif |
| 295 | }; |
| 296 | |
| 297 | /** |
| 298 | * Open the piped log process |
| 299 | * @param p The pool to allocate out of |
| 300 | * @param program The program to run in the logging process |
| 301 | * @return The piped log structure |
| 302 | * @tip The log program is invoked as APR_SHELLCMD_ENV, |
| 303 | * @see ap_open_piped_log_ex to modify this behavior |
| 304 | */ |
| 305 | AP_DECLARE(piped_log *) ap_open_piped_log(apr_pool_t *p, const char *program); |
| 306 | |
| 307 | /** |
| 308 | * Open the piped log process specifying the execution choice for program |
| 309 | * @param p The pool to allocate out of |
| 310 | * @param program The program to run in the logging process |
| 311 | * @param cmdtype How to invoke program, e.g. APR_PROGRAM, APR_SHELLCMD_ENV, etc |
| 312 | * @return The piped log structure |
| 313 | */ |
| 314 | AP_DECLARE(piped_log *) ap_open_piped_log_ex(apr_pool_t *p, |
| 315 | const char *program, |
| 316 | apr_cmdtype_e cmdtype); |
| 317 | |
| 318 | /** |
| 319 | * Close the piped log and kill the logging process |
| 320 | * @param pl The piped log structure |
| 321 | */ |
| 322 | AP_DECLARE(void) ap_close_piped_log(piped_log *pl); |
| 323 | |
| 324 | /** |
| 325 | * A macro to access the read side of the piped log pipe |
| 326 | * @param pl The piped log structure |
| 327 | * @return The native file descriptor |
| 328 | */ |
| 329 | #define ap_piped_log_read_fd(pl) ((pl)-> : enter=0, leave=0
->fds : include/http_log.h line=284 column=17
fds[] : enter=0, leave=0
[0]) |
| 330 | |
| 331 | /** |
| 332 | * A macro to access the write side of the piped log pipe |
| 333 | * @param pl The piped log structure |
| 334 | * @return The native file descriptor |
| 335 | */ |
| 336 | #define ap_piped_log_write_fd(pl) ((pl)-> : enter=0, leave=0
->fds : include/http_log.h line=284 column=17
fds[] : enter=0, leave=0
[1]) |
| 337 | |
| 338 | /** |
| 339 | * hook method to log error messages |
| 340 | * @ingroup hooks |
| 341 | * @param file The file in which this function is called |
| 342 | * @param line The line number on which this function is called |
| 343 | * @param level The level of this error message |
| 344 | * @param status The status code from the previous command |
| 345 | * @param s The server which we are logging for |
| 346 | * @param r The request which we are logging for |
| 347 | * @param pool Memory pool to allocate from |
| 348 | * @param errstr message to log |
| 349 | */ |
| 350 | AP_DECLARE_HOOK(void, error_log, (const char *file, int line, int level, |
| 351 | apr_status_t status, const server_rec *s, |
| 352 | const request_rec *r, apr_pool_t *pool, |
| 353 | const char *errstr)) |
| 354 | |
| 355 | #ifdef __cplusplus |
| 356 | } |
| 357 | #endif |
| 358 | |
| 359 | #endif /* !APACHE_HTTP_LOG_H */ |
| 360 | /** @} */ |
| 361 | [EOF] |